Set Time and date

http://www.ghtrout.com

Setting the time and date on a Nortel M1/CS1000 PBX

The format used when setting time and date in Overlay 2 (LD 2) is this:

.STAD dd mm yyyy hh mm ss

(dd=Date; mm=Month; yyyy=Year; hh=Hour; mm=Minute; ss=Seconds)

Making the change: Log in to the PBX, then

>ld 2

TFC000

.TTAD FRI 05 09 2008 08 45 56 <<< Tell the time and date

.

TFC000

.STAD 05 09 2008 08 45 59 <<< Set the time and date

.

.TTAD FRI 05 09 2008 08 46 00 <<< Tell the time and date again

TFC000

>LOGO

http://www.ghtrout.com

Here is an Aspect Script that you can use

;Put in Procomm Aspect directory then compile ;and then select and run script as needed. ;Make sure your PC time is perfectly set. ;You must already be logged in to the PBX ;No need to be in a LD ;Takes your PC time and sends it to LD2 STAD then logs out of PBX ; ;As found on Tek-Tips.com ; ;This version found at GHTROUT.com ; proc main integer iDay, iMonth, iYear, iMin, iHour, iSec string sSend ltimeints $LTIME iYear iMonth iDay iHour iMin iSec strfmt sSend "STAD %02d %02d %d %02d %02d %02d" iDay iMonth iYear iHour iMin iSec set txpace 20 transmit "****^M" pause 1 transmit "ld 2^M" waitfor "." transmit "TTAD^M" waitfor "." transmit sSend transmit "^M" waitfor "." mspause 20 transmit "TTAD^M" waitfor "." mspause 20 transmit "****^M~~LOGO^M~" endproc